- Growhow UK - Programmable Upgrade to ESD
- Exxon Esso, Fawley FCCU Olefins Project, Protective Instrument System
- Ineos Chlor Caustic Soda Plant - Mimic Panel
- Ineos Chlor Genesis - ESD
- Kemutec Project Crystal - Control Panels
- Lucite Emergency Shutdown System Upgrade
- Terra Nitram 3 - ESD Trip Panel
- Terra Nitrogen - Burner Management (BMS)
- Yaraco Acetic Acid Plant - ESD
Application: Emergency Shutdown Systems Upgrade
Installation Area: Cassell Works, Teesside
Client: Lucite International
SELLA CONTROLS has commenced work on the upgrade of Emergency Shutdown (ESD) systems for Lucite International at its Cassel Works site in Teesside. The upgrade applies to MM7 - one of the site’s two Methacrylate-based Monomer (MM) plastics processing plants - and will see the gradual replacement of several dozen legacy ESD systems with a solution implemented using eight HIMA HIQuad H51q programmable electronic systems.
The upgrade also includes the provision of two HIQuad H51q systems on the MM8 side of the plant (again to provide ESD functions and to replace legacy systems) in the processing areas and for utilities. These two systems join a HIQuad that was installed a few years ago to provide ESD for just the Sulphuric Acid Recovery (SAR) area of the plant.
The equipment being replaced is all discrete logic-based, implemented using either electromechanical relays or solid-state transistors contained within standalone units with up to 10 inputs each. Conversely, each HIQuad is a rack-based system that employs two dual (1002D) processor-based command modules and several racks containing I/O modules. Moreover, each input is simplex and continuously toggled to monitor for any ‘stuck at’ conditions; and it is through this diagnostic coverage that HIQuad achieves its TÜV IEC 61508 SIL3 certification.
HIQuad is a very advanced and reliable system, and the ability to add I/O modules as required makes for a very scalable solution. Specifically, the scalability is enabling SELLA CONTROLS to replace the legacy ESD systems one at a time – resulting in minimal disruption to Lucite’s processes. The new ESD functions will, in the long-term, interface with the site’s distributed control system (DCS) via Ethernet. SELLA CONTROLS is also providing a HMI comprising two PCs and 65-inch monitors, which show the status of the ESD systems and all site alarms.
Download SELLA CONTROLS' Safety Systems brochure.
Please contact us for further information